o-rings

$2.98$11.89

SKU: N/A Category:

Hits: 2757

For Benjamin and Crosman airguns.

Read each description below and then choose your options from the drop down menu.

=                                    =                                 =

Rifle o-rings 
For your  Marauder Rifle, Field and Target Rifle, Armada Rifle and Semi-automatic Rifle.

 

Airgun leaking?
Direct replacement o-rings for the fill adapter housing, gauge port, and the valve assembly.
For properly lubing the o-rings, add hill airgun silicone to your order.
+                                    +

Pistol o-rings

For your Benjamin Marauder BP2220 Pistol, Woods Walker Pistol, or Crosman 17xx series PCP Pistols.

Airgun leaking  🙁
Direct replacement o-rings for the fill adapter housing, gauge port, and the valve assembly.
For properly lubing the o-rings, add hill airgun silicone to your order.
=                                      =
*Barrel o-rings for Benjamin Field and Target Rifle, Marauder Rifle, Armada Rifle, Fortitude Rifle, Marauder Pistol, Woods Walker Pistol. 
Worn o-rings that need to be replaced or missing o-rings, can allow for air leaks, velocity loss, velocity inconsistencies, and excessive hammer bounce.
Fits into the grove that is located just inside the barrel at the breech end. 
Seals the barrel to the bolt to prevent air from leaking during the shot cycle.
Your choice for either .177, .22, or .25 caliber barrels.
+                                      +

Leaking fill port?

Replace the o-ring inside the foster fitting.

 

Includes: 1- Each high temperature / high pressure rated o-ring for Male Side Foster Fill Fitting – Check Valve, shipping and no sales tax.

+                                      +

 

*hill airgun 100% silicone fluid.   Safe for Crosman, Benjamin, and other airguns.

 For coating/lubing the o-rings on:  Airguns, hand pumps, fill tanks, scuba tanks, and other uses.

 Why should you choose hill airgun 100% silicone fluid;

+  Safe for PCP, spring piston, pump, and nitro piston air guns.

+  100 %  Pure Silicone Fluid.

+  Great for high temperature applications.

+  Does NOT contain Petroleum distillates.

+  Does not contain fillers, which can cause leaks in high pressure systems  (silicone grease contains fillers).

+  Thicker formula stays where you need it.

+  Safe to use on all rubber products.

+  No mess applicator/dropper.

+  1 bottle will last a long time.

 

+                                   +

Handheld deburring / reaming tool.

This tool is the Best option I have found to easily and precisely remove the sharp edge on the inside of the gauge port opening.

To prevent air leaks, removing the sharp edge keeps the o-rings on the valve assembly and the gauge port from being nicked during their installation.  

Directions:  Rotate the blade of the reaming tool clockwise around the entire inside sharp edge of the gauge port opening 3 to 4 times.

 

Also great for removing the sharp edge from other products too.

.